Are you bored with disposable vapes that are overpriced and run out in the middle of the day? You need something accurate, reliable, and something that won’t burn a hole in your wallet. Maybe you’re finally quitting cigarettes.
You’ve landed on the Innokin Endura T22 Pro. Great choice, friend. It’s the Toyota of vapes: reliable, easy, and it just works. But if you’re new to it, setting it up can feel a bit like assembling flat-pack furniture. Don’t worry. Once you know how, it’s very easy.
This guide will help you set up, fill, and fire up your Innokin Endura T22 Pro without any of the usual hassles or confusing vape shop hassles.
Getting Started: Charging and Coils
The first thing you need to know about the Innokin Endura T22 Pro is that it needs a bit of juice before you can use it. And yes, it uses a coil.
Charge It Up
Think of the battery like your phone. You wouldn’t use it straight out of the box, would you?
- Find the USB-C cable in the box. It’s the new, oval-shaped one.
- Plug it into the bottom of your Innokin Endura T22.
- Plug the other end into a low-power USB port (like a laptop or a low-amp wall plug). Don’t use your super-fast phone charger; it can damage the battery over time.
- The little lights will tell you it’s charging. Wait until it’s fully charged. It doesn’t take long.
Charge your new Innokin Endura T22 fully before its first use. This helps the battery last longer in the long run.
The Coil: The Heart of the Flavour
Every vape needs a coil. This is the tiny heating element inside the tank that turns your liquid into sweet, sweet vapour. The Innokin Endura T22 Pro uses T18-E coils. They’re brilliant for a proper mouth-to-lung (MTL) draw, that’s the style of vaping that feels like smoking a cigarette.
Coil Installation is a Cinch:
- Unscrew the base: The bottom metal section of the tank (the bit with the airflow holes) unscrews from the main glass section.
- Pull out the old coil: If there’s one already in there, just give it a firm tug. It pulls straight out.
- Push in the new coil: Take a new coil out of its little blister pack. It only goes in one way. Push it firmly into the central hole of the tank base.
- Prime the coil (CRITICAL STEP): Before screwing it all back together, take your e-liquid bottle and drop 4-5 drops of liquid directly onto the white cotton windows you can see on the side of the coil. This is called ‘priming’. It stops you from getting a nasty, burnt taste (a ‘dry hit’) the first time you fire it up.
Priming a coil is like wetting a sponge before you wash up. If you use a dry sponge, it doesn’t work right. If you don’t prime your coil, you burn the cotton, and it’s toast.
Filling and Vaping Your T22 Pro
The Innokin Endura T22 Pro has a much easier filling system than the older models. No more tilting the whole thing sideways.
The Top-Fill Method
The tank holds 2ml of liquid, the legal limit here in the UK. Filling it is quick and mess-free.
- Slide the Top: Look for a small arrow or marker just under the drip tip (the mouthpiece). Push the top cap sideways at that point. It should slide open like a little door, revealing a kidney-shaped hole.
- Fill the Hole: Insert the nozzle of your e-liquid bottle into the hole. Squeeze the liquid in until it reaches the top.
- Close and Wait: Slide the top cap back until it clicks shut.
- Wait Five Minutes: This is the second critical waiting step. Now that the tank is full, you need to wait five minutes to allow the liquid to soak fully into the coil’s cotton. If you skip this, you’ll burn the coil, and you’ll have to chuck it.
Action Plan After Filling:
- Wait: 5 minutes minimum. Go stick the kettle on.
- Adjust: Set the power level (we’ll cover that next).
- Vape: Start with small puffs to ease the coil in.
Setting Your Power Level
The Innokin Endura T22 Pro is fantastic because it lets you adjust the power. It has four levels, and you switch between them using the button near the base of the device.
| Setting | Wattage (Power) | Best For | Vapour Density |
|---|---|---|---|
| Level 1 (Lowest) | 9.5W | High nicotine strength (18mg+) | Light, discreet |
| Level 2 | 11W | Medium nicotine strength (12mg) | Standard |
| Level 3 | 12.5W | Lower nicotine strength (6mg) | Fuller, slightly warmer |
| Level 4 (Highest) | 13.5W | Flavour chasing, if you like it warm | Warmest and densest |
Expert Tip: For the best coil life and flavour, start at Level 2 (11W). If it feels too weak, bump it up to Level 3. Going straight to Level 4 will burn out your coils faster. The Innokin Endura T22 Pro is designed for a smooth, consistent experience, not huge clouds.
Essential Maintenance for Your Innokin Endura T22
This device is low maintenance, but you do have to change the coil regularly. Think of it like putting petrol in a car. It’s just part of the deal.
When to Change the Coil
You’ll know. Honestly. The flavour will drop off a cliff. It will start tasting muted, maybe a bit dry, or even just plain disgusting, like old socks.
Signs It’s Time for a New Coil:
- Bad Flavour: Your favourite mango flavour now tastes like burnt sugar.
- Reduced Vapour: You’re puffing away, but barely any vapour is coming out.
- Leaking: An old, saturated coil can sometimes start to leak a little from the airflow holes.
- Gurgling: The vape sounds like it’s trying to gargle. This means the coil is flooded.
A coil in the Innokin Endura T22 should last you anywhere from 1 to 3 weeks, depending on how much you vape and how sweet your e-liquid is. Sweet liquids (like dessert or lemonade flavours) kill coils faster.
General Cleaning
You don’t need to deep-clean the whole thing, but a quick wipe down helps.
- Mouthpiece (Drip Tip): Wipe this with a tissue every day. It gets a bit of condensation build-up.
- Base Connection: If you see any wetness where the tank screws onto the battery, wipe it dry immediately. Liquid in the connection can stop the battery from reading the coil.
Final Verdict
If you’re moving away from cigarettes or those sickly-sweet Elf Bars, the Innokin Endura T22 Pro is a phenomenal device. It uses cheap, common coils, the battery lasts ages, and the draw feels exactly like a traditional cigarette.
Forget about those complicated vapes that look like they belong in a spaceship. This is a straightforward, reliable workhorse. Get your hands on a bottle of 50/50 e-liquid (anything higher than 60VG will struggle in this coil) and enjoy the simplicity. Stop paying a fiver a day for a disposable. Grab your Innokin Endura T22 and save a fortune.
