Are you stuck trying to figure out how to swap the coil in your AEQ kit? Don’t stress. It’s miles easier than it looks. You don’t need a degree in engineering to keep your vape running smoothly. You want great flavour and thick vapour. That all comes down to the coil. When your vape starts tasting a bit burnt, or the vapour just isn’t what it used to be, it’s time for a new one. Specifically, a fresh AEQ Boost Coils.
How to Install AEQ Boost Coils
Installing your new AEQ Boost Coils is a doddle. It’s a plug-and-play system, meaning you just push the coil into the pod. No fiddly screwing needed. It’s like changing the batteries in your telly remote. Here’s the step-by-step lowdown.
What You’ll Need
- Your AEQ device and pod.
- A new AEQ Boost Coils pack (make sure you pick the right resistance, like 0.6 Ohm for bigger clouds).
- Your chosen vape juice (or e-liquid).
- A bit of tissue paper, things can get messy.
Step-by-Step Coil Change
This whole process should take you less than two minutes. Seriously.
- Remove the Pod: First off, pull the pod (that’s the little plastic tank that holds the juice) out of the main battery section. It’s usually held in place by magnets. Give it a firm but gentle tug.
- Pull Out the Old Coil: Turn the pod upside down. Look at the bottom; you’ll see the old coil sitting snug in a hole. Grip it firmly and just pull it straight out. It’s a friction fit, so it might take a small wiggle. Throw the old one away, it’s done its job.
- Prime the New AEQ Boost Coils: This step is crucial. Do not skip this! The coil has cotton inside, and that cotton needs to be wet before you fire it up. Find the small cotton windows on the side of the new AEQ Boost Coils. Drip a tiny drop or two of your e-liquid onto each window.
- Why prime? If you vape dry cotton, it burns instantly. That gives you a nasty ‘dry hit’ and kills your new coil before you even start. Think of it like making a brew, you have to let the teabag steep.
- Push in the New Coil: Take your primed AEQ Boost Coils and push it into the hole at the bottom of the pod. Make sure it’s sitting flush and straight. It should feel secure.
- Fill the Pod: Open the filling port on your pod and top it up with your e-liquid. Close the port tightly to stop any leaks.
- The Waiting Game (The ‘Soak’): Now, put the filled pod back into the device. Stop right there. You absolutely must let the new AEQ Boost Coils sit and soak up the juice for at least five to ten minutes.
- A full five-minute soak prevents burning. It gives the cotton inside the AEQ Boost Coils time to get completely saturated. If you rush it, you’ll be back to the burnt taste in no time.
- Take a Test Puff: After the wait, take a few short, gentle puffs without pressing the fire button (if your device allows it). This helps pull the juice into the coil. Then, start vaping at a lower power setting for the first few minutes to break the coil in. Enjoy your fresh flavour.
What Are AEQ Boost Coils Anyway?
If you’re new to vaping, or maybe you’re upgrading from those cheap, non-refillable disposable vapes, the AEQ kit is a great choice. The AEQ Boost Coils are the heating elements that turn your liquid into that smooth, satisfying vapour.
They are basically a piece of wire wrapped in cotton. The wire heats up, the cotton holds the liquid, and poof, you’re vaping. Devices like the AEQ kit are open systems. That means they’re refillable, and you only need to change that small, inexpensive AEQ Boost Coils part, not the whole tank. It’s much cheaper in the long run than buying a new disposable every day.
Why Choose AEQ Boost Coils?
You might be wondering why these coils are a good fit for you.
- Longevity: If you prime them right (see step 3!), they tend to last a decent while, often a week or more, depending on how heavily you vape.
- Cost-Effective: A pack of coils costs a fraction of what you’d spend on the equivalent number of disposable vapes. If you’re using this to quit smoking or save money, this is the way to go.
- Great Flavour: They are designed to give a really clean, crisp taste from your e-liquid.
If you’re used to the super-simple function of something like a Vaporesso Xros or an Elf Bar, switching to a device with removable AEQ Boost Coils is the next natural step. You get better performance and save a pile of cash.
Getting the Best Life Out of Your AEQ Boost Coils
You want your coil to last as long as possible, obviously. Here are a few quick tips, straight from my experience:
| Action | Result |
|---|---|
| Keep it Full | Never let your pod run completely dry. If the cotton gets exposed to air, it burns quickly. |
| Use Quality Juice | Cheap, overly sweet liquids clog the coil faster. Higher quality liquids are kinder to the cotton. |
| Take Shorter Puffs | Chain-vaping (taking loads of long, rapid puffs) doesn’t give the coil enough time to re-soak. Space them out a bit. |
| Mind the Power | Stick to the wattage range printed on the side of the AEQ Boost Coils. Don’t push them too hard. |
You see, it’s not just about the installation of the AEQ Boost Coils; it’s about treating them right once they are in.
Final Words
Don’t let the thought of changing a coil put you off using a great refillable device like the AEQ. It’s honestly not a complex procedure. If you can handle filling up a kettle, you can handle installing AEQ Boost Coils.
Remember the rules: prime the cotton and wait five minutes before you hit the fire button. Do that, and you’ll get a brilliant vaping experience every time with zero burnt hits.
