How to Fill the Vaporesso Xros Pod?

Vaporesso Xros Pod

Happens to the best of us. And if you’re new to refillable pods, the first fill can feel confusing.
You don’t know where to put the juice. You don’t want to spill it. And you definitely don’t want a burnt hit. So let’s sort it properly.

Pop off the mouthpiece, push your e-liquid nozzle into the red fill port, squeeze gently, then snap the top back on and let it sit for a few minutes. That’s the whole thing in one sentence. But getting it right every time, without leaks, without mess, without burnt cotton, needs a few more simple steps. Let’s break those steps down.

What You Need Before You Start

  • Your Vaporesso Xros device
  • A fresh Xros pod
  • Your favourite 50/50 nic salt
  • A tissue ( it helps)

You don’t need tools. You don’t need strength. You just need a steady hand.

Why Filling the Xros Pod Feels Odd at First

If you’re used to disposables, you never deal with filling. You vape, bin, and Done. With an Xros pod, you refill it the same way you’d top up a tiny drink bottle. Once you’ve done it twice, it becomes simple to you. And the big win? It saves you a lot of money. That’s why so many disposable users move to the Xros. The flavour is similar but cheaper, like swapping from daily takeaways to cooking at home.

How to Fill the Vaporesso Xros Pod? (Step-by-Step)

1. Take the pod off the device

Hold the pod and gently pull it out. No twisting. It just slides out.

2. Pop off the mouthpiece

This is the part most people get nervous about. Don’t worry, it’s designed to come off. Hold the pod in one hand and use your thumb to push the mouthpiece forward.  It should click off.  If it feels stiff, push from the front edge, not the sides.

3. Find the red fill port

You’ll see three holes:

  • One red hole – This is the fill port
  • One small hole – Air release
  • One big middle bit – Coil chamber (don’t put juice here)

Only fill in the red section. That’s the safe spot.

4. Squeeze your e-liquid slowly into the red port

Stick the nozzle in and squeeze gently. Tips for an easy fill:

  • Hold the pod slightly tilted
  • Don’t rush it
  • Keep an eye on the juice level
  • Stop when it reaches near the top

If you fill too fast, it might bubble up. Just wipe it with a tissue.

5. Close the mouthpiece

Push the mouthpiece back on until it clicks. If it doesn’t click, push a little harder, not Hulk strength, just firm.

6. Let the pod sit for 5 minutes

This gives the cotton time to soak up the liquid. If you skip this step, you’ll burn the coil instantly. Put the pod down, make a cuppa, come back, and you’re ready.

7. Pop the pod back in and vape

The Xros has auto-draw, so just inhale and enjoy the flavour.

How to Fill the Vaporesso Xros Pod? (Fast Version)

If you ever forget, here’s the quick reminder:

  • Remove pod
  • Snap off the mouthpiece
  • Fill through the red port
  • Close top
  • Wait 5 minutes
  • Vape

This short version still counts toward your question: How to fill the Vaporesso Xros pod?

Why the Xros Pod Is Actually One of the Easiest to Fill

Some pod kits use rubber plugs. Some use sliding doors. Some feel like you’re opening a secret box. The Xros pod skips all that. The top-fill system means you don’t take the pod out every time. You just pop the cap open and refill. Compared to kits like the Uwell Caliburn A3, the Xros pod is cleaner and quicker. And compared to disposables, you’re saving enough money for a cheeky takeaway every week.

What Liquids Work Best?

To avoid leaks, burning, or weak flavour, use:

  • 50/50 nic salts
  • 10mg or 20mg strength

You can use freebase 50/50 liquids, too, if you want less nicotine. But don’t use thick high-VG liquid. It’s too thick for the pod to soak up. Think of it like using the wrong petrol for a car, the wrong type, bad performance.

How Often Should You Fill the Pod?

Depends on how much you vape.

  • Light vaper – Once every 1–2 days.
  • Medium vaper – Once a day.
  • Heavy vaper – Twice a day, sometimes more. 

The Xros pod holds around 2ml, so it’s the same size as most disposable tanks.

How Do You Know When to Refill?

  • Clear drop in flavour
  • Less vapour
  • Cotton inside looks dry
  • You can see the juice level dropping below halfway

Don’t wait until it’s bone dry. That’s how coils burn. Treat it like petrol, don’t wait until the warning light starts blinking.

Common Mistakes When Filling the Xros Pod (And How to Fix Them)

  • Filling through the wrong hole – If you fill the middle chamber, it floods. Always use the red port.
  • Leaving no space for air – If the pod overflows, stop filling earlier next time.
  • Vaping straight away – This burns the coil. Always wait 5 minutes.
  • Using thick liquid – High VG = burnt hits.
  • Filling too fast – Slow and steady wins. If you fix these, your pod should last ages.

How to Make Your Xros Pod Last Longer

  • Fill before it gets too low
  • Don’t chain vape like you’re racing
  • Use the right liquid
  • Keep the mouthpiece clean
  • Avoid leaving it in a hot car or pocket

These pods can last anywhere from 5 days to 14 days, depending on how you vape.

Comparison: Xros Pod vs Disposable Vape

A lot of people switch from disposables to the Xros because:

  • Better flavour consistency
  • Cheaper long-term
  • Stronger coils
  • Better airflow control
  • Easy refills

Using the Xros pod feels similar to a disposable like the Crystal Bar 600, but stronger and smoother, especially with nic salts. If you like the tight pull of a cig, the Xros is perfect.

Final Verdict

If you’re trying to work out how to fill the Vaporesso Xros pod, just remember the red port, slow squeeze, and a bit of patience. Once you’ve done it once or twice, it becomes second nature. The Xros is one of the easiest pod kits to live with. Simple. Clean. Reliable. Cheap to run. Exactly what most people need when switching from smoking or pricey disposables. If you want a stronger flavour and cheaper vaping, keep using your Xros. Just stick to 50/50 liquids and fill through the red port every time.

Leave a Reply

Your email address will not be published. Required fields are marked *